Table of Contents
Advertisement
5 .
Carefully lift the print platform (A) and tape the spacer (B) to the
printer in the location shown .
6 .
Place the lower insert on top of the print pad and fold the sides
outward .
7 .
Manually move the print jet mount to the center of the printer and place
the top insert over the mount .
NOTE: The top insert is designed to keep the sides of the lower
insert pressed outward .
8 .
Place the printer in the protective bag and then place it in the lower
foam support inside the box .
3D Systems, Inc.
104
A
B
Hide quick links:
Advertisement
Table of Contents
