EKOCYCLE Cube User Manual page 13

2 . Open the box .
3 . Remove the upper foam support .
4 . Remove the printer from the box and remove the protective bag from
the printer . Place the printer on a solid, level base where you intend to
use it .
NOTE: When installing the printer there must be a minimum of
8" (203 mm) of space on top and on either side of the printer .
NOTE: There must be a minimum of 4" (102 mm) space in front
of and behind the printer .
Front View
Hand Clearance Around the Printer
5 . Remove the top insert .
3D Systems, Inc.
8" (203 mm)
Top View
Build Plate Travel Area
9
4" (102 mm)
4" (102 mm)