5 .
Select
Save to
File .
NOTE: Selecting Save to Shelf will save the print file to
My Shelf . The original 3D file will remain there as well .
NOTE: Cubify will generate a print file .
6 .
Once the file has been generated, browse to the USB mass
storage device and select Save .
NOTE: The print file must be saved to the root
directory (first level of your file structure) of your USB
mass storage device .
7 .
Select OK .
8 .
Refer to the section titled
information about printing from a USB mass storage device .
3D Systems, Inc.
Printing Your Creation
for
71