M 14.00 Fuel-Injection Equipment; M 14.10 Fuel Pressure Pipe - Hatz Diesel 1D30 S Workshop Manual

M 14.00 Fuel-injection equipment

M 14.10 Fuel pressure pipe

–
Preparations:
Ref.: M-Disassembly cross reference
scheme.
Dismantling:
–Unscrew union nuts 1 and remove fuel
pressure pipe with rubber bushing 3.
NOTE:
Ensure connector 2 remains tight during
removal of fuel pressure pipe.
Always use a wrench to hold connector 2
tight during disassembly of fuel pressure
pipe !
Inspection / repair:
– Check for fractures or chafing.
– Check conditions of sealing surfaces.
Replace if any evidence of damage!
Assembly:
– Place and pre-tighten (fingertight) fuel
pressure pipe without strain.
Ensure rubber bushing 3 is in position of
the clip 4.
– Tighten union nuts 1.
Hold connector 2 with wrench.
Torque to specification!
3
1D . . / 03.06