M 01.30 Oil Sump And Suction Sieve - Hatz Diesel 1D30 S Workshop Manual

M 01.00 Crankcase

M 01.30 Oil sump and suction sieve

–
Preparations:
Ref.: M-Disassembly cross reference
scheme.
Oil sump
Dismantling:
– Remove in numerical sequence 1...2.
– Remove oil sump 3 using a plastic ham-
mer.
Inspection / repair:
– Check oil sump for possible cracks, de-
formations, flatness of sealing surface
and any other damage.
Assembly:
– Assemble in reverse sequence 3...1.
Apply sealant and locking agent as
specified.
1 D 30 - 31 - 35 - 40 - 41 only!
Always use flat washers in addition to the
lock washers for the retaining screws in
pos. A to avoid the retaining screw from
interferring with the crankcase which will
force the base plate from its position.
3
1D . . / 03.06
Suction sieve:
The strainer housing 6 can be used both
for anti-clockwise and clockwise engines.
Only the assembly position is different.
- At anti-clockwise engines, the stamped L
on the base plate and molded L on
strainer housing have to be placed to-
gether.
- This is also applicable for clockwise en-
gines (letter R accordingly).
The strainer housings of types 1D 30-31-
35-40-41-50 and types 1D 60-80-81-90
differ in their height b (see chart).
Apply loctite D for mounting screws 4.