A 07.00 Lubrication oil
A 07.20 Lub.-oil filters, strainers
–
General:
Retro-fit of lub.-oil filter is possible at any
time and requires removing of closing cover
only.
Version A 07.20.1
Version A 07.20.2
Preperations: –
Dismantling:
– Remove in numerical sequence 1...6.
Version A 07.20.2:
Spring in filter housing 5 remains.
Inspection / repair:
– Visual inspection.
– Check oil filter element 2 and rectangular
rings 6.
Maintenance according to instruction book.
Assembly:
– Assemble in reverse sequence 6...1.
Apply High-temp. lub. -grease as speci-
fied!
– Ensure rectangular ring 6 at bottom side
remains in position during assembly.
– Place and tighten Allen screws crosswise
and uniformly.
2
1D . . / 03.06