A 15.00 Housings - flanges - adaptors
A 15.20 Adaptor housings
–
Preparations:
– Remove starter motor if so fitted.
Dismantling:
– Remove in numerical sequence 1...7
depending on kind of application.
Parting sheet 9 may remain.
NOTE:
Removal of parting sheet requires dismant-
ling of flywheel 8.
Inspection / repair:
– Visual inspection.
– Check housing for cracks or any other
damage.
Assembly:
– Assemble in reverse sequence 9...1.
– Assemble starter motor if so fitted.
2
1D . . / 03.06