Cylinder 1D50 - Hatz Diesel 1D30 S Workshop Manual

M 06.00 Cylinder

Cylinder 1D50:

For 1D50 engines, a press-fit-sleeve is as-
sembled to aluminium cooling jacket,
hence in case of wear a sleeve replace-
ment is possible.
Sealing between sleeve and jacket is
made by an O-ring at top and by a glued
on gasket for bottom.
During assembly of sleeve to jacket, apply
grease K in the lower region in order to
avoid damages to the O-ring.
3
1D . . / 03.06