A 05.20 Starter Motors - Hatz Diesel 1D30 S Workshop Manual

A 05.00 Start electrical

A 05.20 Starter motors

- 17 -
General:
Starter motors are different in construction
as well as voltage and direction of rotation is
concerned.
It is of utmost importance not to combine
parts from different construction or version.
Preparations:
– Disconnect battery in sequence - / +
– Disconnect cable connections as necessary,
respectively remove retaining plate with
voltage regulator depending on kind of
equipment.
Dismantling:
– Remove in numerical sequence 1...6.
Studs 7 may remain.
For removal use tool - 17 -
Inspection / repairs:
– Visual inspection.
– Check bushing and pinion for wear and/or
any other damage.
– Check pinion for free movement on shaft.
NOTE:
Repairs or adjustments in connection with
the starter motor should be carried out by a
HATZ-Distributor or any other authorized
workshop.
Assembly:
– Assemble in reverse sequence 6...1.
– Reassemble respectively reconnect elec-
trical system as dismantled before.
– Reconnect battery in sequence +/-
– Check (start) electrical system for proper
function.
2
1D . . / 03.06