List Of Error Display / Indication; Operator Call Errors - Canon Pixma MP530 Service Manual

2. LIST OF ERROR DISPLAY / INDICATION

Errors and warnings are displayed by the following ways:
1) Operator call errors are indicated by the Alarm LED lit in orange, and the error and its solution are displayed on the LCD in text.
2) Warnings during printing from a computer are displayed on the printer driver Status Monitor.
3) Error codes are printed in the "operator call/service call error record" area in EEPROM information print.
Buttons valid when an operator call error occurs:
1) ON/OFF button: To turn the machine off and on again.
2) OK button: To clear and recover from an error. In some operator call errors, the error will automatically be cleared when the
cause of the error is eliminated, and pressing the OK button may not be necessary.
3) Stop/Reset button: To cancel the job at error occurrence, and to clear the error.
2-1. Operator Call Errors (by Alarm LED Lit in Orange)
Error
No paper (ASF).
*1
No CD / DVD tray .
No paper in the front
paper feed cassette.
*1
No CD or DVD .
Paper jam.
Paper jam in the rear
guide.
Paper jam in the under
guide.
No ink.
Ink tank not installed.
Ink tank may not be
compatible.
The print head is not
installed, or it is not
properly installed.
Head contact is faulty.
Error code Message on the LCD
LOAD PAPER
[1000]
SET PAPER AND
PRESS [OK]
CD-R TRAY IS NOT
[1001]
SET
LOAD PAPER
[1003]
SET PAPER AND
PRESS [OK]
[1002] NO DVD/CD IS SET
[1300] PAPER JAMMED
[1303]
[1304]
[1601],
CHECK INK
[1602]
U041
[1611],
[1612][1613]
[1660] CHECK INK
U043
CHECK CARTRIDGE
[1401]
U051
Set the paper in the ASF, and press the OK button.
Set the CD / DVD tray, and press the OK button.
Set the paper in the cassette, and press the OK button.
Set a CD or DVD in the CD / DVD tray (which is ejected at
error occurrence), and inset the CD / DVD tray in the proper
position. Then, press the OK button.
Remove the jammed paper, and press the OK button.
Replace the empty ink tank(s), and close the cover.
Pressing the OK button will clear the error without ink tank
replacement, however, ink may run out during printing.
Note:
[1601]: Pigment BK
[1602]: Dye BK
[1611]: Dye Yellow
[1612]: Dye Magenta
[1613]: Dye Cyan
Possible causes are as follows:
- The ink tank may not be installed properly (The lamp on the
ink tank is off). Install the ink tank appropriately.
- The ink tank may not be compatible with this machine (The
lamp on the ink tank is off). Install the appropriate ink tank.
- Install the print head properly.
- Replace the print head.
1-5
Solution