List Of Error Display / Indication; Operator Call Errors - Canon PIXMA MP500 Service Manual

2. LIST OF ERROR DISPLAY / INDICATION

Errors and warnings are displayed by the following ways:
1) Operator call errors are indicated by the Alarm LED lit in orange, and the error and its solution are displayed on the
LCD in text and by icon.
2) In printing from a computer, warnings are displayed on the MP driver Status Monitor.
3) Error codes are printed in the "operator call/service call error record" area in EEPROM information print.
<Buttons valid at an operator call error>
- ON/OFF button:
The machine is turned off.
- OK button:
After an error is cleared, the machine recovers. With some operator call errors, the error is automatically cleared
when the error cause is corrected, so the OK button is not necessary to be pressed.
- Stop/Reset button:
The job at an operator call error is cancelled to clear the error.
2-1. Operator Call Errors (by Alarm LED Blinking in Orange)
Error
[Error code]
No paper (ASF). [1000] Auto sheet feeder.
No CD / DVD tray.
*1
[1001]
No paper in the front
paper feed cassette.
[1003]
No CD or DVD. [1002]
*1
Paper jam. [1300]
Paper jam in the rear
guide. [1303]
Paper jam in the under
guide. [1304]
Front door close error.
[1250]
No ink. [1600]
Ink tank not installed.
Message on the LCD
There is no paper. Load paper
and press [OK].
There is no CD-R tray. Attach
the tray and press [OK].
Cassette.
There is no paper. Load paper
and press [OK].
Printable disc is not set. Correctly
place a disc in the CD-R tray and
press [OK].
The paper is jammed. Clear the
paper and press [OK].
Paper output tray is closed. Press
the lower left button to open the
paper output tray.
Ink has run out. Replace the ink
tank and close the cover.
Solution
Set the paper in the ASF, and
press the OK button.
Set the CD / DVD tray, and press
the OK button.
Set the paper in the cassette, and
press the OK button.
Set a CD or DVD in the CD /
DVD tray (which is ejected at
error occurrence), and inset the
CD / DVD tray in the proper
position. Then, press the OK
button.
Remove the jammed paper, and
press the OK button.
Open the paper output tray.
Replace the empty ink tank(s), or
press the OK button.
Install the applicable ink tank(s)
1-5
Remarks
Error in paper feeding
from the ASF.
Error in the duplex
printing unit.
Error in paper feeding
from the cassette.
The error is indicated if
the paper output tray is
closed at start of a print
job, or while a print job
is being performed.
Pressing the OK button
will clear the error
without ink tank
replacement, however,
ink may run out during
printing.