Canon Pixma MP530 Service Manual page 63

Timer cleaning - 9
(All in sequence)
Timer cleaning - 10
(All in sequence)
At print head replacement
(All in sequence)
*4
At ink tank replacement
(Black/Color/All in
sequence)
Manual cleaning
(Black/Color/All at the same
time)
Deep cleaning
(Black/Color/All at the same
time)
If the print head has not been
capped before power-on
(All in sequence)
*1: The counter for the on-arrival cleaning is checked at opening and closing of the scanning unit (the first opening and
closing only), before start of printing, at dot-count cleaning (at paper ejection), and at manual cleaning, and the on-
arrival cleaning is performed according to the counter value. After each on-arrival cleaning, the counter value is
reduced by 1.
When the counter value is 3, 2, or 1: On-arrival cleaning is performed.
When the counter value is 0: On-arrival cleaning is not performed.
*2: When 24 to 60 hours have elapsed since the previous Black cleaning, timer cleaning - 0 is performed. However, this
cleaning will be conducted up to 5 times from the printer installation, and no further timer cleaning - 0 will be
performed.
*3: The period of time since the previous cleaning is counted by Black and Color separately. For this reason, the
cleaning mode may differ according to Black or Color.
*4: When only the black ink tank is replaced, Black cleaning is performed. One of the color ink tanks is replaced, Color
cleaning is performed. Both the black and color ink tanks are replaced, All-at-the-same-time cleaning is performed.
To the table of contents
If 4,320 to 8,640 hours have elapsed since
the previous Black/Color cleaning till the
start of the next printing.
If 8,640 or longer hours have elapsed since
the previous Black/Color cleaning till the
start of the next printing.
When the print head is removed and
installed.
When an ink tank is replaced (without the
print head removal or re-installation)
- Via the operation panel (All at the same
time only)
- Via the MP driver (Selectable from Black,
Color, or All at the same time)
- Via the operation panel (All at the same
time only)
- Via the MP driver (Selectable from Black,
Color, or All at the same time)
<Part 2: 2. CLEANING MODE AND AMOUNT OF INK PURGED>
1.58 (Black)
1.00 (Color)
0.45 (Black)
1.50 (Color)
0.30 (Black)
1.00 (Color)
0.14 (Black)
0.50 (Color)
1.58 (Black)
1.00 (Color)
0.30 (Black)
1.00 (Color)
2-3
90
90
100
80 (All in sequence)
40 (Black)
65 (Color)
50 (All at the same
time)
40 (Black)
40 (Color)
100 (All at the same
time)
45 (Black)
60 (Color)
80 (All in sequence)
To the top