Service Mode Operation - Canon Pixma MP530 Service Manual

Bottom plate cleaning
Print head replacement
<Standalone machine operation>
Turn on the machine. On the operation panel, select Maintenance or Device Settings menu, then a desired
function.
Menu
Nozzle check
(nozzle check pattern print)
Cleaning
Deep cleaning
Auto head align
(automatic print head
alignment)
Align print head
(manual print head alignment)
Roller cleaning
Bottom plate cleaning
Prevent paper abrasion
(head-to-paper distance
setting)
(6) Service mode
Function
Service test print
- Model name
- Destination
- ROM version
- USB serial number
- Waste ink amount
- CD / DVD sensor correction
value
- Ink system function check
result
- CD / DVD sensor correction
result
etc.
EEPROM information print
- Model name
- Destination
- ROM version
- Waste ink amount
See "Standalone machine operation" below, or
perform from the MP driver Maintenance tab.
The print head is replaceable at the same position
as for ink tank replacement. (Open the scanning
unit. When the carriage stops at the center, the
print head can be replaced.)
Set a sheet of A4 or letter size plain paper in the ASF or cassette (according to the Feed
Switch button setting).
Set a sheet of A4 or letter size plain paper in the ASF.
Set 2 sheets of A4 or letter size plain paper in the ASF or cassette (according to the Feed
Switch button setting).
Set 3 or more sheets of A4 or letter size plain paper in the ASF or cassette to be cleaned.
Fold a sheet of A4 or letter size plain paper in half, then open it. Set the paper in the ASF
with the opened surface facing up.
Procedures
See "Service mode operation procedures"
below.
See "Service mode operation procedures"
below.
alignment (by selecting the optimum
values) as with the conventional models
can be performed.
Cleaning of the platen ribs when the back
side of paper gets smeared.
Remarks
Set a sheet of A4 or letter size paper.
For print sample, see
Service test print, <Service test print sample>.
Set a sheet of A4 or letter size paper.
1-40
Remarks
3-4. Verification Items, (1)