Settings And Adjustments Before Use; Adjusting The Grip Belt; Attaching An External Microphone; Attaching The Tripod - JVC GY-HM650U Instructions Manual

Settings and Adjustments
Before Use

Adjusting the Grip Belt

Open the pad and adjust the position of the grip belt
accordingly.
Caution :
If the grip is loose, the camera recorder may fall
0
off resulting in injuries or malfunction.

Attaching an External Microphone

You can attach a separately sold microphone to the
microphone holder.
1 Turn the knob on the microphone holder
anticlockwise to loosen and open the
microphone holder.
2 Place the microphone in the microphone
holder.
3 Turn the knob on the microphone holder
clockwise to secure the microphone.
4 Connect the microphone cable to the
[INPUT1] or [INPUT2] terminal.
5 Pin the microphone cable to the clamp.
6 Perform the settings for the microphone
correctly.
(A P61 [Audio Recording] )
1, 3
2
4
5

Attaching the Tripod

Use the screw hole at the bottom of this camera
recorder.
(3/8×16UNC, 1/4×20UNC)
Use the screw hole that suits the tripod.
To prevent the camera recorder from falling off,
which may result in injuries or damages, read the
instruction manual of the tripod to be used and
make sure that it is securely attached.
o Bottom
Caution :
Use the tripod on a stable surface.
0
To prevent the camera recorder from falling,
0
attach securely using the rotation prevention
hole.
Use screws with screw length 5 mm and below.
0

Attaching the Large Eyecup

Attach the large eyecup (supplied) to prevent
0
external light from entering the viewfinder
screen and cameraman's vision.
Align and attach to the groove of the eyecup
0
mounted on the camera recorder.
The large eyecup can be attached in any
0
direction.
Large Eyecup (supplied)
Eyecup
Memo :
Do not remove the eyecup that is premounted
0
on the camera recorder.
27