JVC GY-HM650U Instructions Manual page 96

ALC Limit
For setting the maximum gain value of "ALC",
which electrically boosts the sensitivity level
according to the brightness automatically.
[Setting Values: 24dB, R18dB, 12dB, 6dB]
Auto Iris Limit (OPEN)
For setting the limit value of the OPEN end when
auto iris is enabled.
[Setting Values: F5.6, F4, F2.8, F2, RF1.6]
Auto Iris Limit (CLOSE)
For setting the limit value of the CLOSE end when
auto iris is enabled.
[Setting Values: F11, RF8, F5.6]
EEI Limit
For setting the shutter speed control range when
EEI is enabled.
[Setting Values: 4F-stop, R3F-stop, 2F-stop]
Smooth Trans
For setting the shock reduction function, which
slows down the sudden change when switching
with the [GAIN] or [WHT BAL] selection switch.
[Setting Values: Fast, Middle, Slow, ROff]
Memo :
However, this function is disabled when the
0
[FULL AUTO] switch is set to "ON", or when
switching the gain selection switch that was set
to "ALC".
GAIN L/GAIN M/GAIN H
For setting the gain value of each position on the
[GAIN] selection switch.
This is fixed at "ALC" when the [FULL AUTO] switch
is set to "ON".
[Setting Values: 24dB, 21dB, 18dB, 15dB, 12dB,
9dB, 6dB, 3dB, 0dB, -3dB, -6dB]
(Default values GAIN L: 0dB, GAIN M: 6dB, GAIN
H: 12dB)
Memo :
When [Shooting Mode] is set to "Standard",
0
"-3dB" and "-6dB" cannot be selected.
(A P100 [ Shooting Mode ] )
96
AE LEVEL SW
For specifying the operation of the cross-shaped
button (HI) on the right side.
AE LEVEL/VFR:
0
Sets the number of frames during Variable
Frame Rec, and operates as the AE level setting
button in other cases.
(A P82 [Variable Frame Rec] )
AE Level:
0
Operates as the AE level setting button at all
times.
Disable:
0
Disables the button.
[Setting Values: AE LEVEL/VFR, RAE Level,
Disable]
Handle Zoom Speed
This function allows you to set the zoom speed of
the zoom lever at the handle when the [ZOOM FIX/
VAR/OFF] switch is set to "FIX".
[Setting Values: 1 to 8 (R 5)]
AF Assist
For setting whether to allow temporary manual
focus adjustment by turning the focus ring in the AF
mode.
[Setting Values: On, ROff]
Memo :
This setting is effective only when the [FOCUS]
0
switch is set to "AUTO".
The manual focus adjustment mode is
0
temporarily activated by turning the focus ring in
the AF mode. If the focus ring is not operated for
a certain time, the camera recorder returns to the
AF mode.
User Switch Set...
For specifying user button related settings.
(A P97 [User Switch Set Item] )