JVC GY-HM650U Instructions Manual page 136

Clamp Filter
(supplied)
Wire Clamp
(supplied)
AV input
* Select the display pattern in [A/V Set] B
[HDMI/SDI Out].
(A P107 [ HDMI/SDI Out ] )
* When [Record Format] B [System] is set to "SD",
only SD-SDI signals are output.
(A P111 [ System ] )
* To display the menu screen or display screen on
an external monitor, set [A/V Set] B [Video Set]
B [Display On TV] to "On".
(A P107 [ Display On TV ] )
136
DEVICE
AV
REMOTE
HOST
DC
SDI IN
HDMI
Connecting via SDI
Digital video signals, together with embedded
0
(superimposed) audio signals and time code
signals, are output for both the HD-SDI and SD-
SDI signals.
User's bit output from the [HD/SD SDI] output
0
terminal is used as a flag to determine valid
video signals. Therefore, accurate values will
not be output.
Memo :
The sampling frequency for embedded
0
(superimposed) audio signals is 48 kHz. Time
code of the built-in time generator as well as
playback time code are also output.
Settings for SDI Down-Converted Output
You can select the method to "down convert" HD
0
video images to SD images during SD-SDI
output.
Set using [A/V Set] B [Video Set] B [SD
0
Aspect].
The available modes include "Side Cut", "Letter"
0
(blackened at the top and bottom), and
"Squeeze" (full size, compressed at the left and
right).
(A P113 [ SD Aspect ] )
Memo :
When [Record Format] B [System] is set to "SD",
0
and [SD Aspect] is set to "4:3", this item cannot be
selected.
(A P111 [ System ] )