Clip Metadata - JVC GY-HM650U Instructions Manual

Clip Metadata

You can access the page for editing the metadata
via a browser on devices such as a smartphone,
tablet terminal, or PC, and display or rewrite the
metadata that is recorded to a clip.
1 Access the main page of the camera.
Access the page from a device such as a
smartphone, tablet terminal, or PC.
(A P146 [Connecting via a Browser] )
2 Tap (click) the [Clip Metadata] tab to start
up the [Clip Metadata].
3 Set the camera recorder to the "Remote
Edit Mode".
"Change to Remote Edit Mode?" appears on
0
the display screen of the camera recorder.
Select [Change] and press the Set button (R)
0
to switch to the Remote Edit Mode.
148
Memo :
When the menu or status is displayed, display
0
of the confirmation screen will be put on hold.
If the menu is displayed on the camera recorder,
0
close the menu.
If the status is displayed on the camera recorder,
0
close the status display.
Pressing the Set button (R) on the camera
0
recorder while in the Remote Edit Mode ends
the Remote Edit Mode forcibly and switches to
the Camera mode.
4 Select the clip to rewrite the metadata.
0
2
0
Memo :
You can switch the displayed slot using the [Slot
0
3
A] and [Slot B] tabs.
You can jump through the displayed clips
0
backward or forward by 30 clips each using the
[↑-30] and [↓+30] tabs.
A list of recorded clips appears on the [Clip
Metadata] screen.
Tap (click) the clip for which you want to
rewrite the metadata.