Connecting Via Wired Lan; Connecting Via 3G Adapter - JVC GY-HM650U Instructions Manual

Connecting via Wired LAN

You can connect a device such as a smartphone,
tablet terminal, or PC directly to the camera
recorder using a cross cable to access the camera
recorder's web functions.
1 Connect the [HOST] terminal on the camera
recorder to the smartphone, tablet
terminal, PC, etc. using a cross cable.
2 Perform setting on the camera recorder,
and start up the [Wizard] screen.
(A P139 [Camera Setup for Network
Connection] )
3 [Ethernet] appears on the [Wizard] screen.
4 Press the I button to display the [IP
Address Configuration] screen.
Follow the screen instructions to complete
setting. Perform setting for the following.
IP address setting (DHCP or manual)
0
IP Address
0
Subnet Mask
0
Gateway
0
DNS Server
0
5 Setting is complete.
After setting is complete, you can access the
camera recorder via a browser.
(A P146 [Connecting via a Browser] )

Connecting via 3G Adapter

You can make use of the FTP function by
connecting a USB-Cellular adapter to this camera
recorder.
1 Connect the USB-Cellular adapter to the
[HOST] terminal of the camera recorder.
2 Perform setting on the camera recorder,
and start up the [Wizard] screen.
(A P139 [Camera Setup for Network
Connection] )
3 [Cellular] appears on the [Wizard] screen.
4 Press the I button to display the [Select
Carrier] screen.
Follow the screen instructions to complete
setting. Perform setting for the following.
Carrier selection
0
Access point
0
Connection phone number
0
User name
0
Caution :
You can access the web functions via a browser
0
on devices such as a smartphone, tablet
terminal, or PC only in a LAN environment.
Note that you may have to pay very high bills in
0
the case of pay-per-use contracts. Fixed price
contract is recommended if you are using the
network function.
Note that you may have to pay very high bills if
0
the APN is incorrectly set. Make sure that the
setting is correct.
There may be communication even when you
0
are not using the network function.
Remove the adapter when the function is not in
use.
141