Adjusting The Brightness - JVC GY-HM650U Instructions Manual

Detection Frame (Orange)
Detection Frame (Blue)
3 Press the Set button (R) to confirm the
person for face detection.
Memo :
Press the [CANCEL] button to cancel the
0
selection.
You can specify the detection sensitivity and the
0
operation speed after losing sight of the face
using [Main Menu] B [Camera Function] B
[User Switch Set] B [Face Detect] B
[Sensitivity] and [Hysteresis].
(A P97 [ Sensitivity ] )
(A P98 [ Hysteresis ] )

Adjusting the Brightness

Adjust the brightness using Iris, Gain, Shutter
speed and ND filter according to the brightness of
the object.
Adjusting the Brightness Automatically
When the [FULL AUTO] switch is set to "ON", Iris,
Gain, Shutter speed and ND filter are automatically
adjusted according to the brightness of the object
to maintain optimum brightness.
MENU/THUMB
AE LEVEL
CANCEL
GAIN WHT BAL SHUTTER
AE LOCK/4
FULL AUTO
ON
OFF
Memo :
You can use the cross-shaped button (HI) on
0
the side of the camera recorder to set the target
level (brighter/darker) to maintain optimum
brightness during automatic adjustment.
(A P95 [ AE Level ] )
The convergence speed of the automatic
0
adjustment for gain, shutter and iris can be set
in the menu.
(A P95 [ AE Speed ] )
If one or more of the items (Gain, Iris and
0
Shutter) have been set to "Auto", the value of the
corresponding items when the user button that
is assigned "AE Lock" is pressed can be fixed.
(A P98 [ AE Lock ] )
Adjusting the Brightness Manually
When the [FULL AUTO] switch is set to "OFF",
some or all of the items (Iris, Gain and Shutter
Speed) can be manually adjusted.
(A P52 [Adjusting the Iris] )
(A P53 [Setting the Gain] )
(A P54 [Setting the Electronic Shutter] )
Memo :
If Iris, Gain and Shutter Speed are manually
0
adjusted, the [AE Level] setting is temporarily
disabled.
51