User Switch Set Item - JVC GY-HM650U Instructions Manual

User Switch Set Item

USER1 - USER7, LCD KEY▲/LCD KEY▶/LCD
KEY▼/LCD KEY◀
By assigning one of the following functions to each
of the [FOCUS ASSIST/1], [OIS/2], [LOLUX/3], [AE
LOCK/4], [ZEBRA/5], [MARKER/6], [C.REVIEW/7]
buttons or the cross-shaped buttons on the LCD
monitor, these buttons can be used to control the
assigned function (on/off, start, switch).
Set according to the shooting conditions. Usable
only in the Camera mode.
[Setting Values: None, Zebra, Marker, Bars, Focus
Assist, OIS, Flash Band, LCD Backlight, Lolux, AE
Lock, Spot Meter, Face Detect, OK Mark, Clip
Cutter Trig, Backup Trig, Clip Review, Load Picture
File, White Balance, Preset Zoom1, Preset Zoom2,
Preset Zoom3]
Lolux
To increase the sensitivity when in dim
surroundings, set a value in the Lolux mode.
[Setting Values: 36dB, R30dB]
Clip Review
For specifying the operation when any of the
[USER1]-[USER7], [LCD KEY▲], [LCD KEY▶],
[LCD KEY▼], or [LCD KEY◀] items is set to "Clip
Review".
Last 5sec:
0
Views about 5 seconds of the clip from the
ending.
Top 5sec:
0
Views about 5 seconds of the clip from the
beginning.
Clip:
0
Views the entire clip.
[Setting Values: RLast 5sec, Top 5sec, Clip]
Memo :
This item is selectable when any of the [USER1]-
0
[USER7], [LCD KEY▲], [LCD KEY▶], [LCD
KEY▼], [LCD KEY◀] items is set to "Clip
Review".
Spot Meter
For specifying the operation when any of the
[USER1]-[USER7], [LCD KEY▲], [LCD KEY▶],
[LCD KEY▼], or [LCD KEY◀] items is set to "Spot
Meter".
(A P70 [Setting Spot Meter] )
Max & Min:
0
Displays the brightest and darkest areas of the
image.
Max:
0
Displays the brightest area of the image.
Min:
0
Displays the darkest area of the image.
Manual:
0
Displays the image brightness at a specified
position.
[Setting Values: RMax & Min, Max, Min, Manual]
Face Detect
For specifying the operation when any of the
[USER1]-[USER7], [LCD KEY▲], [LCD KEY▶],
[LCD KEY▼], or [LCD KEY◀] items is set to "Face
Detect".
Select the control to track results of face detection.
AF&AE:
0
Sets auto focus and exposure control for the
face that is being tracked.
AF:
0
Sets auto focus for the face that is being tracked.
[Setting Values: RAF&AE, AF]
Memo :
When "AF" is specified, this function will be
0
activated only when the [FOCUS] switch is set
to "Auto".
When "AF&AE" is specified, this function will be
activated only when the [FOCUS] switch is set
to "Auto", or when one or more of the items
(Gain, Iris and Shutter) is set to Auto mode.
9 Sensitivity
For setting the level of ease of face detection.
[Setting Values: Low, Middle, RHigh]
97