Settings Item - JVC GY-HM650U Instructions Manual

Time Stamp
For setting whether to display shooting date/time
information in the recorded video.
[Setting Values: On, ROff]
Memo :
The date/time display style can be changed in
0
[LCD/VF] B [Display Settings] B [Date Style]/
[Time Style].
(A P106 [ Date Style ] )
(A P106 [ Time Style ] )
When the date/time is hidden while the menu
0
screen, status screen or other screen is
displayed, the date/time during this period will
not be recorded to the video. A confirmation
screen appears if you try to display the menu
screen or status screen during recording.
When [System] is set to "HD+Web" or "HD+SD",
0
the shooting date/time information cannot be
recorded to the image to be recorded in slot B.
Clip Set
9 Clip Name Prefix
For setting the first four characters of the name of
the clip file to be recorded to the SD card.
Enter any of the 38 characters including alphabets
(upper case), numbers (0 to 9), "_" (underscore),
and "-" (hyphen) using the software keyboard.
(A P93 [Text Input with Software Keyboard] )
[Setting Values: xxxG] (The default value of xxx is
the last three digits of the serial number.)
Memo :
When [Main Menu] B [System] B [Record
0
Set] B [Record Format] B [WFormat] is set to
"AVCHD", this setting is not reflected in the file
name of the clip.
However, it is recorded as the display name of
the clip in the thumbnail display.
9 Reset Clip Number
For assigning a new number (Clip Number) by
resetting it (0001).
Select [Reset] and press the Set button (R) to reset
the number.
When [WFormat] is set to "AVCHD", the clip
number is reset to "00000".
When other clips exist on the SD card, the smallest
available number is used after reset.
Example:
0
If the [Clip Name Prefix] is "ABCD", and
"ABCD0001" already exists on the SD card,
"ABCD0002" will be assigned.

Settings Item

For specifying network-related settings.
The display of the software keyboard for input
varies according to the item you are setting.
(A P93 [Text Input with Software Keyboard] )
Web
For setting the functions that make use of the web
browser.
9 Web Access
To access via a web browser, set to "On".
[Setting Values: ROn, Off]
9 Camera Name
For setting the name to be displayed on the web
browser. Enter not more than 8 characters using
the software keyboard.
(Default value: HM650)
9 Change Password
Changes the password for accessing via a web
browser.
The current password is displayed. Enter a new
password directly.
Enter not more than 31 characters using the
software keyboard.
Connection Setup
For configuring the network connection settings.
Configure the settings by following the instructions
on the [Wizard] screen that is displayed according
to the type of adapter that is connected to the rear
[HOST] terminal.
You can Store, Load, or Delete the settings you
have specified on the [Wizard] screen.
9 Wizard
A [Wizard] screen appears according to the type of
adapter that is connected to the rear [HOST]
terminal.
Follow the instructions.
9 Load
Loads the settings on the [Wizard] screen.
(A P157 [Reading the Connection Settings
File] )
9 Store
Saves the settings on the [Wizard] screen.
(A P156 [Saving the Connection Settings File] )
9 Delete
Deletes the saved settings.
(A P158 [Deleting Connection Settings] )
115