Record Set Item - JVC GY-HM650U Instructions Manual

9 Import Metadata
For importing metadata from the FTP server.
Memo :
This option is not available when [Network] is set
0
to "Off".
9 Settings...
For specifying network-related settings.
(A P115 [Settings Item] )
Memo :
This option is not available when [Network] is set
0
to "Off".
Reset All
Resets all menu settings.
Memo :
[Date/Time] and [Time Zone] cannot be reset.
0
(A P111 [ Date/Time ] )
(A P111 [ Time Zone ] )
This item is not selectable when recording in
0
Camera mode, during Clip Review, and in Media
mode.
Date/Time
For setting the year, month, day, hour, and minute.
Memo :
If the signal reception for GPS satellites allows
0
date and time to be set based on the GPS
information, you can set the time obtained from
the GPS satellite by pressing the [FOCUS
ASSIST/1] button.
If information cannot be obtained from GPS
satellites and date/time cannot be set, the
[FOCUS ASSIST/1] button appears grayed out.
The display order of the date (year, month, day)
0
follows the setting in [Display Settings] B [Date
Style]. However, the 24-hour format is used for
the hour display regardless of the [Time Style]
setting.
(A P106 [ Date Style ] )
Time Zone
For setting the UTC time difference in units of 30
minutes.
[Setting Values: UTC-00:30-UTC-12:00, UTC,
UTC+14:00-UTC+00:30 (in 30 min increments)]
(Default values: UTC-05:00 (U model), UTC (E
model))
Memo :
If [Date/Time] is already set, the [Date/Time]
0
item is automatically adjusted when [Time
Zone] is altered.
System Information
9 Version
Displays information on the firmware version.
9 Fan Hour
For displaying the usage time of the internal fan.
Memo :
Under normal environment, dust will
0
accumulate on the internal fan when the camera
recorder is used over a long period. Dust may
enter the camera recorder especially if it is used
outdoors. This may affect the image and sound
quality of the camera recorder. Check and
replace the fan after every 9000 hours
(suggested guideline).
9 Open Source License
Displays the license for the open source software
used by this camera recorder.

Record Set Item

Record Format
After setting of all items in the [Record Format]
menu is complete, select [Set] at the bottom of the
screen to apply the new settings on the camera
recorder and switch the record format. A "Please
Wait..." message appears during switching.
9 System
For selecting a system definition.
HD:
0
Records in "HD" (high definition) quality
SD:
0
Records in "SD" (standard definition) quality
111