JVC GY-HM650U Instructions Manual page 19

Operation Mode
Camera Mode
Media Mode
USB Mode
Remote Edit Mode
This is the camera shooting mode. The camera recorder starts up in Camera
0
mode when the power is turned on.
Camera images are output on the viewfinder and LCD monitor. When a
0
recordable SD card is inserted, the camera recorder enters the recording
standby mode. "STBY" appears on the operation mode display area of the
LCD monitor and viewfinder.
Press the [REC] trigger button to start recording.
0
Memo :
Playback of SD card is not possible in Camera mode. However, you can
0
check the most recently recorded video clip.
(A P72 [Viewing Recorded Videos Immediately (Clip Review)] )
This mode allows you to play back or delete clips recorded on the SD card.
0
When a playable SD card is inserted, the thumbnail or playback screen is
0
displayed on the viewfinder and LCD monitor.
Press the [MODE] selection button to enter Media mode when you are not
0
shooting in Camera mode. Once the camera recorder is in Media mode,
thumbnails of the selected media slot are displayed.
This mode allows you to connect to a PC and transfer the files on an SD card
0
to the PC.
When the camera recorder is connected to a USB cable, the message
0
"Change to USB Mode?" appears.
Select [Change] and press the Set button to switch to USB mode.
(A P134 [Managing/Editing Clips on a PC] )
In USB mode, the camera recorder is recognized by the connected PC as a
0
peripheral drive. (USB mass storage class only)
Disable the connection on the PC and remove the USB cable from the camera
recorder to switch to Camera mode.
(A P134 [Managing/Editing Clips on a PC] )
Memo :
When a USB cable is connected during recording, the message appears after
0
recording stops.
If playback is in progress, the message appears once the files are closed
0
automatically, such as when playback stops.
Files on the PC cannot be written to the SD card.
0
This is a mode for accessing the page for editing the metadata that is recorded
0
in a clip via a browser on devices such as a smartphone, tablet terminal, or
PC.
When you access via a browser on devices such as a smartphone, tablet
0
terminal, or PC, a "Change to Remote Edit Mode?" message will appear on
the display screen of the camera recorder.
Select [Change], and press the Set button to switch to the Remote Edit mode
for editing the clip's metadata.
(A P148 [ Clip Metadata ] )
Memo :
If you access via a browser on devices such as a smartphone, tablet terminal,
0
or PC while recording is in progress, the message appears after recording
stops.
If playback is in progress, the message appears once the files are closed
0
automatically, such as when playback stops.
Description
19