Settings And Adjustments Before Use; Adjusting The Grip Belt; Attaching The External Microphone (Sold Separately); Opening/Closing The Lens Cover - JVC CONNECTED CAM GY-HC500U Instructions Manual

Settings and Adjustments
Before Use

Adjusting the Grip Belt

Open the pad and adjust the position of the grip belt
accordingly.
.
Caution :
If the grip is loose, the camera recorder may fall
0
off resulting in injuries or malfunction.
Attaching the External Microphone
(Sold Separately)
You can attach a separately sold microphone to the
microphone holder.
.
1 Turn the knob on the microphone holder
counterclockwise to loosen and open the
microphone holder.
2 Place the microphone in the microphone
holder.
3 Turn the knob on the microphone holder
clockwise to secure the microphone.
4 Connect the microphone cable to the
[INPUT1] or [INPUT2] terminal.
5 Pin the microphone cable to the clamp.
6 Perform the settings for the microphone
correctly.
(A P74 [Audio Recording] )
1, 3
5 2
5

Opening/Closing the Lens Cover

Use the lens cover open/close switch to open or
close the lens cover.
Before shooting, open the lens cover.
When this camera recorder is not in use, close the
lens cover to protect the lens.
Lens cover switch
.
Caution :
Do not press against the lens cover with force.
0
Doing so may damage the lens or the cover.

Attaching the Tripod (Sold Separately)

Use the screw hole at the bottom of this camera
recorder.
(3/8×16UNC, 1/4×20UNC)
Use the screw hole that suits the tripod.
To prevent the camera recorder from falling off,
which may result in injuries or damages, read the
"INSTRUCTIONS" of the tripod to be used and
make sure that it is securely attached.
4
o Bottom
.
Caution :
If the camera recorder exceeds the weight limit
0
of the tripod, do not mount it on the tripod.
Use the tripod on a stable surface.
0
To prevent the camera recorder from falling,
0
attach securely using the rotation prevention
hole.
Use screws with screw length 5 mm and below.
0

Settings and Adjustments Before Use

33