Table of Contents
Advertisement
Settings and Adjustments
Before Use
.
Attaching the Handle Unit K
The handle unit is detached from the camera
recorder unit in the factory shipment.
* GY-HM170U/GY-HM170E does not come with
the handle unit.
For details on purchasing the handle unit, please
contact the local dealers in your area.
To use the handle unit, attach it by following the
steps below.
* Attach or detach the handle unit when the power
is turned off.
.
1 Fit the handle terminal at the bottom of the
handle unit to the handle unit mount at the
top of the camera recorder.
Fit the handle unit carefully, paying attention
0
not to damage the terminals at the bottom of
the unit.
2 Slide the handle unit in the direction
indicated by the arrow to attach it to the hot
shoe of the camera recorder.
3 Press the screw on the handle unit and turn
it in the clockwise direction. Tighten it
securely to fasten the unit to the camera
recorder.
The handle unit may be unsteady if the screw
0
is not securely fastened, and may fall off
during use.
Caution :
Attach or detach the handle unit when the power
0
is turned off.
Doing so when the power is turned on can result
in malfunction.
Adjusting the Grip Belt
Open the pad and adjust the position of the grip belt
accordingly.
.
Caution :
If the grip is loose, the camera recorder may fall
0
off resulting in injuries or malfunction.
Attaching the External Microphone O
You can attach a separately sold microphone to the
microphone holder.
.
1 Turn the knob on the microphone holder
counterclockwise to loosen and open the
microphone holder.
2 Place the microphone in the microphone
holder.
3 Turn the knob on the microphone holder
clockwise to secure the microphone.
4 Connect the microphone cable to the
[INPUT1] or [INPUT2] terminal.
5 Pin the microphone cable to the clamp.
6 Perform the settings for the microphone
correctly.
(A P65 [Audio Recording] )
Settings and Adjustments Before Use
1, 3
2
4
5
27
Advertisement
Table of Contents
