JVC GY-HM650U Instructions Manual page 116

Metadata Server
For registering the FTP server for importing the
metadata and the path of the file to be imported.
Up to 4 settings can be registered.
9 Meta-FTP1 to Meta-FTP4
(The name specified in the respective
[Alias] items is displayed)
o Alias
For setting a name to distinguish the settings of this
camera recorder.
The name set in this item will be displayed in the
[Import Metadata] options.
* Enter not more than 31 characters.
o Server
For setting the server name ("mystation.com", etc.)
or the IP address ("192.168.0.1", etc.) of the FTP
server.
* Enter not more than 127 characters using single-
byte alphanumeric characters (a to z, 0 to 9),
single-byte hyphen [-], or dot [.].
o Port
Enter the FTP server port number to use using an
integer between 1 and 65535.
(Default value: 21)
o File Path
Enter the path name for the metadata file ("/pub/
meta.xml", "/home/user/meta2.xml", etc.)
* Enter not more than 127 characters.
o Username
Enter the user name for connecting to the FTP
server.
* Enter not more than 31 characters.
o Password
Enter the password for connecting to the FTP
server.
* Enter not more than 31 characters.
o PASV Mode
For setting whether to set the communication mode
used for file transfer to the passive mode.
Set to "On" if the camera is inside a firewall, and a
connection from the FTP server to the camera
cannot be established.
[Setting Values: On, ROff]
116
Clip Server
For setting the server and directory for uploading
recorded clips in the SD card to the FTP server.
9 Clip-FTP1 to Clip-FTP4
(The name specified in the respective
[Alias] items is displayed)
o Alias
For setting a name to distinguish the settings of this
camera recorder.
The name set in this item will appear on the [FTP
Upload] action screen of the thumbnail display.
* Enter not more than 31 characters.
o Server
For setting the server name ("mystation.com", etc.)
or the IP address ("192.168.0.1", etc.) of the FTP
server.
* Enter not more than 127 characters using single-
byte alphanumeric characters (a to z, 0 to 9),
single-byte hyphen [-], or dot [.].
o Port
Enter the FTP server port number to use using an
integer between 1 and 65535.
(Default value: 21)
o Dir. Path
Enter the path name for the directory to upload to
("/pub", "/home/user", etc.)
* Enter not more than 127 characters.
o Username
Enter the user name for connecting to the FTP
server.
* Enter not more than 31 characters.
o Password
Enter the password for connecting to the FTP
server.
* Enter not more than 31 characters.
o PASV Mode
For setting whether to set the communication mode
used for file transfer to the passive mode.
Set to "On" if the camera is inside a firewall, and a
connection from the FTP server to the camera
cannot be established.
[Setting Values: On, ROff]
Reset Network
Restores all items in the [Network] menu to their
default settings.