JVC GY-HM650U Instructions Manual page 140

P2P Connection
You can access the web function of this camera
recorder from devices such as a smartphone,
tablet terminal, or PC.
1 [Wireless LAN] appears on the [Wizard]
screen.
2 Press the I button to display the [Select
Connection Type] screen.
Select "P2P".
Follow the screen instructions to complete
setting.
Perform setting for the following.
Mode of connection
0
Method of setting
0
* SSID and Passphrase in cases other than
WPS
Memo :
When "WPS" is selected in the [Select Setup
0
Type] screen, the following steps 3 and 4 are not
required.
3 Set the camera recorder to the Camera
mode, and display the [Network] (status)
screen.
Press the [STATUS] button on the camera
0
recorder to display the status screen.
Press the cross-shaped button (HI) to
display the [Network] screen.
Check to ensure that the [SSID] and
0
[Passphrase] that you have set in the wizard
are displayed.
140
4 Select [SSID] from the list of access points
(smartphone, tablet terminal, PC, etc.), and
enter [Passphrase].
0
0
2
5 Setting is complete.
After setting is complete, you can access the
camera recorder via a browser.
(A P146 [Connecting via a Browser] )
Display the list of access points in the
wireless connection settings of the
smartphone, tablet terminal, or PC, and
select "HM650-*****". (The "*****" portion
varies according to the device.)
After the password confirmation screen
appears, enter the [Passphrase] displayed
on the [Network] screen.