Husqvarna 2009 TE 310 Workshop Manual page 38

SETTINGS AND ADJUSTMENTS
Adjusting the valve play
To check the valve clearance, proceed as follows , WITH COLD ENGINE:
First turn counterclockwise fastening rear pin (1) then remove the saddle.
HOW TO REMOVE THE TANK (TC, TXC)
2
Close the fuel tap (2) and loosen the strap (3) on the connecting pipe to the
carburettor, pull the pipe out of the carburettor.
3
Remove the screws (4) and the side panels.
4
Remove the locking screw (A) and pull out the tank with its conveyors.
A
D.4 Part. N. 8000 H0368 (09-2008)