Husqvarna 2009 TE 310 Workshop Manual page 308

2
3
4
5
ELECTRIC SYSTEM, DIGITAL INSTRUMENT
2- SPEED / CLOCK (figure 2)
- SPEED: motorcycle speedmaximum value: 299 Km/h o 299 mph;
- CLOCK: clock- Reading from 0:00 to 23:59:59;
To reset the clock, push the knob SCROLL (A) for more than 3 seconds in order
to increase the hours; release the knob and then, after 3 seconds, it is possible
to increase the minutes;
3- SPEED / TRIP 1 (figure 3)
- SPEED: motorcycle speedmaximum value: 299 Km/h o 299 mph
- TRIP 1: distance- maximum value: 999.9 km (the data will be lost after battery
detachment).
To setup the TRIP, push the SCROLL (A) button holding down more than 3
seconds
4- SPEED / CHRONO (STP) (figure 4)
- SPEED: motorcycle speedmaximum value: 299 Km/h o 299 mph;
- STP 1: miles/kilometers covered time;
- Reading from 0:00 to 99:59:59 (the data will be lost after battery detachment).
To activate the function STP 1, push the knob SCROLL (A) for more than 3
seconds.
- 1st step: function ON;
- 2nd step: stop to the counters;
- 3rd step: STP 1 zero-setting; TRIP 1 and AVS 1 data zero-setting;
- 4th step: function ON;
- 5th step: stop to the counters;
.............................
and so following
5- SPEED / DIGITAL RPM (figure 5)
- SPEED: velocità- Indicazione max: 299 Km/h o 299 mph
- RPM NUMERICO: MIN. 500, MAX 14250
M.38 Part. N. 8000 H0368 (09-2008)