Removing The Front Fork - Husqvarna 2009 TE 310 Workshop Manual

FRONT SUSPENSION

Removing the front fork

Take note of measure "A" which must be restored when reassembling. Set a support
under the engine to lift the front wheel from the ground, working as follows:
-remove,on the L.H. side, the screws (1) , the brake hose and the instrument cable
clamp (TE-SMR) on the fork tube guard;
- remove the six screws (2) and the fork tube guards;
- remove the brake caliper from the L.H. fork tube by unscrewing the two fastening
screws (3);
- remove the front wheel following the instructions on page Y.6;
- unloose the screws (4) fastening each fork slider to the steering head and steering
base;
I.24
Part. N. 8000 H0368 (09-2008)