Husqvarna 2009 TE 310 Workshop Manual page 86

1
3
4
2
2
5
GENERAL OPERATIONS
SMR: use an 8 mm T-wrench and a 10 mm T-wrench inside to remove the
fastening screw (1) of silencers (3) and (4). Remove the spring (2) and extract
3
silencers (3) and (4).
On the left side disconnect the electric connections from the starting motor [use
an 8 mm wrench to remove the earth cable (5) and a 10 mm wrench for the nut
under the rubber cap (6)], remove the clamps (A) that hold the clutch pipe and
the alternator cable.
4
A
E.18
1
6
Part. N. 8000 H0364 (09-2008)