Table of Contents
Advertisement
Starting Up/Shutting Down
Starting Up
1
Open the display
Slide the latch as shown and lift open the dis-
play.
N O T E
The computer will not power on when the
LCD Panel is closed.
2
Turn your computer on
Slide the power switch toward the rear of the
computer and hold it for approximately one
second until the power indicator (
on before releasing it.
C A U T I O N
If the power switch is held for more than four seconds at the ON position,
the power goes OFF. Do not slide the power switch and hold it for more
than four seconds.
After confirming that the power indicator has turned on, do not touch the
power switch until Windows has completely started up. Also do not per-
form any keyboard or trackball operations.
Once the computer is powered off, you must wait at least five seconds
before powering it on again.
When the CPU temperature rises, the computer does not power on to pre-
vent the CPU from overheating. Should this happen, allow the computer to
cool down then switch the power on again.
If the computer still does not turn on, please contact Panasonic Technical
Support.
) turns
1 5
Advertisement
Table of Contents
