Table of Contents
Advertisement
C A U T I O N
If the power switch is held for more than four seconds at the ON position,
the power goes OFF. Do not slide the power switch and hold it for more than
four seconds.
After confirming that the power indicator has turned on, do not touch the
power switch until Windows setup has started.
Once the computer is powered off, you must wait at least five seconds be-
fore powering it on again.
N O T E
The computer will not power on when the LCD panel is closed.
5
Setup Windows
The [Windows 95 Setup Wizard] will run after the computer is turned on. Simply
follow the on-screen instructions.
When the setup procedure is completed, the Windows screen appears.
N O T E
Please read the supplemental "Windows 95 Setup Procedure" for a more
detailed explanation (
Moving the cursor ( ) or selecting items can be done through the trackball
and click buttons. (
If the display is dim or the sound quality is not right, you can adjust the
brightness and volume. (
The power saving function is factory set to remove power from the display
if the computer is not operated or no access is made to a device for two
minutes (Battery) or thirty minutes (AC). The display will resume normal
operation if the trackball is moved or if a key on the keyboard is depressed.
page 70).
page 17).
page 8, 9, 80).
1 3
Advertisement
Table of Contents
