Table of Contents
Advertisement
Creating a Hibernation Data Area
Error Messages
Message on Screen
Partition management information still not
written to disk.
Empty partition with sufficient space not
found.
7 2
Causes and Steps to Take
There is no partition management infor-
mation. The partition management infor-
mation must be initialized with the FDISK
command.
First run the FDISK/MBR command, then
run the FDISK command again to delete
the existing primary MS-DOS partition.
Restart the computer, then run the
HBUTIL command again.
An empty area with sufficient space is
needed to create a hibernation data area as
a Partition. Take steps such as deleting
currently filled areas to free up space.
Advertisement
Table of Contents
