Table of Contents
Advertisement
Installing/Removing the PC Card
C A U T I O N
To remove a PC Card
Before removing a PC Card, go to [Socket Status] (in [Start] - [Settings] -
[Control Panel] - [PC Card (PCMCIA)]), select the PC Card slot and press
[Stop]. When removing a CardBus type card, be sure to restart the computer.
1
Power off your computer
Do not shut down using the suspend or hibernation mode.
C A U T I O N
Do not install or remove peripherals while your computer is in the suspend or
hibernation mode; abnormal operation may result.
2
Removing the PC Card
Pull the button out and then press it.
Pull the PC Card the rest of the way out.
N O T E
Dummy cards are provided at the time of
purchase. They provide protection for the
PC Card slots against such things as dust.
Installing the PC Card
Simply slide the PC Card in until it snaps into
place.
Pull the button out and return it to the original
position.
Please refer to the manual for each card on
how to install the card (insertion is typically
label-side up).
3
Turn your computer on
There are some PC Cards that require a special or updated device driver be in-
stalled. Follow the instructions on the screen and read any related manuals on
how to install device drivers.
(
page 18)
(or the dummy card)
(or the dummy card)
4 7
Advertisement
Table of Contents
