Table of Contents
Advertisement
Setup Utility
P o w e r M a n a g e m e n t
Power Management
• Power Saving (Battery)
• Power Saving (AC)
• Resume Timer
Operation Setting
Power Switch
Panel Switch
PC Card Power
Automatic Hibernation
Battery Setting
when remaining capacity is low [ Suspend ]
This setting specifies whether the computer will
enter suspend or hibernation mode when the re-
maining battery capacity is low.
7 6
If it is enabled, the system will
resume from suspend mode at a
specified time.
[ Suspend ]
[ LCD Off
]
[ ON
]
Power Switch
[ Never
]
Select the power switch function while
the computer is turned on.
Select [Suspend], [Hibernation] or
[Power Off].
Panel Switch
Set the action to take place when the
panel is closed. Select [LCD Off] or
[Suspend].
PC Card Power
Set the power supply for the PC Card
during Suspend mode. Select [ON] or
[OFF].
Automatic Hibernation
Set the amount of time that must
elapse from when the computer enters
suspend status until it automatically
switches to hibernation status. Select
[Never], [5 min], [10 min], [30 min],
[60 min] or [120 min].
Advertisement
Table of Contents
