Table of Contents
Advertisement
4
Setting power management
Click [Start], then [Run].
1 .
Type "c:\panaapp\powerman\setup.exe" under [Open], then click [OK].
2 .
Follow the on-screen instructions to continue installation.
3 .
The display will ask you to restart Windows, then click [Yes] and [Finish].
4 .
Click [Start]-[Settings]-[Control Panel], then double-click [Power].
5 .
Click [Advanced], click the check box to the left of [Wake up the computer
6 .
when the phone rings] to uncheck it then click [OK].
Click [OPL3-SAx power management] and set [Intermediate level of power
7 .
save] for [Level of power consumption].
Click [OK].
8 .
5
Setting display
Double-click [Display] in [Control Panel].
1 .
Click [Settings] under [Display Properties], then click on [Advanced Proper-
2 .
ties].
Click [Monitor] under [Advanced Display Properties] then click [Change].
3 .
Under [Model], select [SuperVGA 1024x768], then click [OK].
4 .
Confirm that there is a check mark for [Automatically detect Plug & Play
5 .
monitor] in [Options] for the [Monitor].
Click [Performance], then select [Apply the changes without restarting].
6 .
Click [Adapter], select [Adapter default] under [Refresh rate], click [Close].
7 .
At the confirmation message, click [OK] and click [Yes].
8 .
Enter the following settings in [Settings] window under [Display Properties].
9 .
P a r a m e t e r
Color palette
Desktop area
Show settings icon on task bar
After entering the settings, click [OK].
1 0 .
At the confirmation message, click [OK] and click [Yes].
1 1 .
S e t t i n g
High Color (16 bit)
800 by 600 pixels
Enabled (enter a check mark)
6 5
Advertisement
Table of Contents
