Table of Contents
Advertisement
Set the parallel port IRQ.
If the setting conflicts with the sound port IRQ setting, the sound port is
automatically set to a different IRQ.
Set the operation mode of the parallel port.
The [EPP] and [ECP] mode settings can be selected only if the parallel
port setting is [278] or [378].
If [Parallel Port Mode] is set to [ECP], set the DMA channel.
Make sure that the setting does not conflict with the DMA setting for [Sound
Port: DMA-A], [Sound Port: DMA-B], or the infrared port.
[Infrared Port]
Set the infrared port IRQ.
If the setting conflicts with IRQ set for the serial port, the serial port is
automatically set to a different IRQ.
[Infrared Port: ASK Mode]
Selecting [Enabled] activates the ASK mode.
Select [Disabled] for the IrDA or FIR mode.
[Infrared Port: DMA]
Set the DMA for the infrared port. Make sure that the setting does not
conflict with the DMA setting for the sound port or the parallel port.
Set the serial port IRQ.
If the setting conflicts with IRQ set for the infrared port, the infrared port is
automatically set to a different IRQ.
Select [Enabled] in order to use the USB port.
Select [Disabled] if you will be using the suspend or hibernation function.
Set the drive to be used to boot the computer.
Select [Enable] if you want to prevent someone from setting the user
password without your knowing it.
Select whether or not to use PCI clock control.
Note that if [Enable] is selected, some CardBus cards may not be detected
properly.
7 9
Advertisement
Table of Contents
