List Of Error Codes - Panasonic CF-M32W5M Operating Instructions Manual

List of Error Codes

If a problem occurs with your hardware, [POST Start up Error(s)] is displayed along with
the error code(s), follow the on-screen instructions.
Setup Utility (
S e t u p :
Rerun the Setup Utility to input the appropriate operating environment
settings.
Ignore the error message(s), and restart the computer.
:
Exit
C o d e
062 Boot failure--default configuration used
101 System Board Failure
102 System Board Failure
106 System Board Failure
151 System Board Failure
161 Bad CMOS Battery
162 Configuration Change Has Occurred
162 Configuration Error
163 Date and Time Incorrect
164 Memory Size Error
201 Memory Size Error
1780 Hard Disk Error
5 2
page 73) is started. Run [Load Default Settings (Non-PnP)].
Default configuration in use
Interrupt controller failure
Timer 2 test failure
Diskette controller failure
Real-time clock failure
Dead battery
Configuration error
CMOS checksum error
Real-time clock is not updating
Memory size error
Memory data error
Fixed disk 0 failure
D e s c r i p t i o n