Fuel Tank Assembly; Fuel Lines - Quick Connect - Polaris 2007 SPORTSMAN X2 800 Service Manual

2007 atv
Table of Contents

Advertisement

FUEL INJECTION

Fuel Tank Assembly

1
6
4
1. Cap 2. Tank Vent 3. Tank Mount 4. Fuel Pump/
Tank Assembly 5. Frame 6. Protective Foil
Fuel Flow
Fuel Tank
* Fuel Pump /
Pressure Regulator
Unit
External Fuel
Filter - 10 micron
Fuel Supply Rail
* component
located in fuel tank
4.6
2
3
5
* Fuel Filters
(30 micron)
(10 micron)
Injectors

Fuel Lines - Quick Connect

Sportsman 700/800 EFI models use quick connect fuel lines.
Refer to the steps below for fuel line removal.
1.
Place a shop towel around the fuel line to catch any
dripping fuel. Squeeze the connector tabs together and
push the locking slide back.
2.
Pull on the fuel line for removal.
3.
To install the line, verify the connector and fuel tank nipple
are clean and free of debris.
4.
Snap the fuel line back over the nipple and slide the locking
mechanism back into place. Verify the connector tabs snap
back into place.
Squeeze Connector Tabs

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2007 sportsman 700 x2 efi2007 sportsman x2 800 efi

Table of Contents