Polaris 2007 SPORTSMAN X2 800 Service Manual page 147

Winch Installation Area
5. Remove the front cover piece by lifting up on sides of the
two locking tabs as shown. Pull the tabs out of the notches
and lift up on the cover piece.
Pull Out to Remove
To install the front cover place top lip of the cover into and lift
up to remove.
1. Place Lip In Groove
Groove
Lip
2. Press in Tabs
BODY / STEERING / SUSPENSION
6. Remove the front headlights (C) or simply disconnect the
electric connector (D) before removing the front plastic
bumper.
C
7. Remove the remaining bolts and screws that secure the
front bumper section to the frame.
D
5
5.7