Body; Side Panel Removal; Front Cover Removal / Installation - Polaris 2007 SPORTSMAN X2 800 Service Manual

Table of Contents

BODY / STEERING / SUSPENSION

BODY

Side panel removal is quick and easy, use the following

instructions for removal and installation.

Remove seat by releasing the latch and lifting up on the

Grasp the rear of the side panel near the rear cab. With a

firm motion, pull the panel outward to disengage the side

panel from the grommet. Pull the panel downward and

rearward to remove it from the ATV.

Reinstall the side panel by reversing the removal procedure.

Open the front storage compartment

Pull up and outward on the front cover to remove the cover.

To install the front cover, insert the tabs of the front cover

into the inserts of the cab. Make sure the tabs are aligned

with the slots. Then press the rear tabs into the slots.

Show Quick Links

Table of Contents