Print Range; Number Of Copies; Collate - Dymo XTL 300 User Manual

 As defaults through the Settings menu: the options will apply to all future print
jobs. If you set defaults, you will still be able to change the print options
individually for a specific label when needed.
To change the default print options
From the Home screen, select
1
Make your desired changes to the print options.
2
Select Done when finished.
3
These settings will be the default every time you print.
To change these settings for an individual print job, press and hold
the print options menu.

Print Range

While working with multiple labels, you can choose to print all labels, the current
label, or a range of labels.
This setting is not saved with your label file.
To set the print range
Press and hold
1
Select Print range.
2
Select the range you wish to print.
3
Select Done and then press
4

Number of Copies

You can print up to 99 copies of the same label at one time.
This setting is not saved with your label file.
To set the number of copies to print
Press and hold
1
Select Copies.
2
Select the number of copies to print.
3
Select Done and then press
4
When printing is finished, the number of copies to print returns to the value set as
default.

Collate

When printing multiple copies of a group of labels, by default the labels are printed
collated. You can choose not to collate the labels, if desired. If you choose to have
the labels print normally, all the copies of the first label are printed before the next
label starts printing.
The following example shows three copies of a group of three labels printed with
and without collation.
Collated
A101 A102 A103 A101 A102 A103 A101 A102 A103
Not collated
®
35 XTL 300
User Guide
and then Print options.
to display the print options menu.
.
to display the print options menu.
.
to display