Rotating The Text; Aligning The Text; Inserting Punctuation; Inserting Symbols - Dymo XTL 300 User Manual

Rotating the Text

The text on your label can appear horizontally (default) or vertically. You can also
rotate the text in 90 degree increments.
To rotate the text
Press .
1
The Text Orientation tool appears.
Use the function keys to select an orientation.
2
Use  or  to select a rotation.
3
To create a vertical label, see Creating a Vertical Label on page 26.

Aligning the Text

The text on your label can be aligned left, center, or right, vertically and
horizontally.
To align the text horizontally
Press + .
1
The Text Alignment tool appears.
Press one of the function keys
2
to select an alignment.
To align the text vertically
Press + .
1
The Text Alignment tool appears.
Press to select
2
the vertical alignment choices.
Press one of the function keys
3

Inserting Punctuation

Punctuation characters can be inserted on your label. Once inserted, the
character is treated the same as any other text.
Refer to Symbols on page 49 for the complete list of punctuation characters
available.
To insert a symbol
Press + any numeric key.
1
The Symbols tool appears.
Use  or  to scroll through the list of characters available.
2
The currently selected character is inserted at the cursor position and the
Symbols tool disappears after a few seconds.

Inserting Symbols

Fractions and other symbols can be inserted on your label. Once inserted, the
symbol becomes a character and is treated the same as text. You can apply bold
and underline to most symbols.
®
25 XTL 300
User Guide
Align Align
left center
Align Align
left center
to show
to select a vertical alignment.
Align Show vertical
right alignment
Align Show
right horizontal
alignment