Dymo XTL 300 User Manual page 12

You can change the amount of time the label maker remains in standby mode
before automatically shutting off. See Changing the Auto Shut-off Time on page
34.
To turn power on
To turn on the display when in
standby mode
To turn power completely off
When the label maker is turned off, the current label and settings are remembered
so you can continue working the next time the label maker is turned on.
If the battery is removed and the power adapter is disconnected, the label and
settings you are currently editing will be lost.
Home
The key returns you to the Home screen from any screen. See Home Screen
on page 10 for more information about the Home screen.
Print
The key prints the currently displayed label.
To print immediately
To set print options
To cancel printing
Cutter Button
The button on the side of the label maker cuts the label.
When printing multiple copies, the label maker prints all labels continuously so you
can cut at the end. A label separator cut mark is printed between each label to
show where each label should be cut.
You can change this setting so that the label maker will pause between each label
allowing you to cut before printing the next label. See Cut Labels on page 36.
Zoom
The keys zoom in or out on a label you are editing. Zoom only applies
when editing a label.
Shift
The key used with another key selects the function or symbol printed above
that key.
+ a letter
Press
+ a number
Press
®
7 XTL 300
User Guide
Press .
s any key
Pres once.
Press and hold for several seconds.
Press once.
Press and hold for several seconds.
once.
Press
Inserts an uppercase letter. Inserts a lowercase letter if
Caps Lock is turned on.
Inserts the symbol over the selected number.