Removing The Label Backing - Dymo XTL 300 User Manual

Removing the Label Backing

™
DYMO XTL continuous labels have an easy-to-peel split
back for easy removal of the label backing.
Does not apply to heat-shrink tubing or pre-sized labels.
To remove continuous label backing
Locate the split on the label backing.
1
Gently pinch the label lengthwise, folding toward the
2
printed side of the label. The label backing will
separate.
Carefully peel away the backing from the label.
3
To remove pre-sized labels from backing
 Gently lift the corner of the label and peel the label from
the backing.
®
5 XTL 300
User Guide
Remove split
backing
Continuous labels
Figure 7
Peel label
from backing
Pre-sized labels
Figure 8