Patch Panel Label - Dymo XTL 300 User Manual

To create a general label
From the Home screen, select
1
Select Portrait or Landscape for the label orientation.
2
Select the label length.
3
Add text and formatting.
4

Patch Panel Label

The Patch Panel editor allows you to quickly create a label that can be applied to
datacom and electrical panels. Each label can contain up to 99 ports and you can
divide the ports into equal groups.
One text object is already added for each port. Barcodes and images cannot be
added to a Patch Panel label.
Text size and style apply to all ports in the label and to all labels in the file. When
Auto fit text is selected for font size, the text in each port is automatically resized
to fit that port. So you may see differences in text size for each port.
Use serialization to automatically populate the ports. When all the ports are filled
on the current label, a new label is created. See Creating a Series of Labels on
page 29.
Patch panel labels can be printed on any type of continuous labels.
The label properties you can set are:
Port numbers Number of ports - up to 99 ports
In groups of - Number of ports available per group is determined by
the number of ports selected so that each group is equal.
Label setup
Continuous - Print one continuous label.
Separate - Print each group of ports as a separate label.
(Default)
Dimensions Center to center distance - Distance from the center of
one port to the center of the next port.
Minimum: 5/32" (3.8 mm)
Maximum: 20" (508 mm)
Group clearance - Distance between groups of ports
when one continuous label is selected.
Minimum: 1/64" (0.4 mm)
Maximum: 20" (508 mm)
Separator lines Yes - Print a separator line between each port. (Default)
No - Don't print a separate line between each port.
Label outline Yes - Show label outline.
No - Hide label outline. (Default)
You create a patch panel label by using a pre-designed template or by entering the
label properties manually. See Transferring Files on page 39 for information
about transferring the latest templates from your computer.
To use a patch panel template
From the Home screen, select
1
Select Apply template.
2
Select the template you wish to use.
3
®
15 XTL 300
User Guide
.
.