Changing The Auto Shut-Off Time; Changing The Recall Data Setting; Setting The Print Options; Print Range - Dymo XTL 500 User Manual

Changing the Auto Shut-off Time

To conserve power, the screen will dim after thirty seconds of inactivity and the
label maker will enter standby mode after three minutes of inactivity. After ten
more minutes of inactivity, the label maker automatically shuts off.
You can change the amount of time the label maker remains in standby mode
before automatically shutting off. Although not recommended, you can also set
auto shut-off to Never.
To change the auto shut-off time
From the Home screen, tap
1
Select the number of minutes until the power is automatically turned off and
2
tap Done.

Changing the Recall Data Setting

When you switch label applications, data from the previous label can sometimes
be used on the new label. Recalling data applies to text-only labels.
When data recall is possible and the recall data setting is turned on, you are given
several recall options:
 Recall once - Recall data from the previous label this one time only. You will
continue to be asked each time data recall is available.
 Always recall - Always recall data from the previous label. From now on data
will always be recalled to the new label when possible.
 Not this time - Don't recall data this one time. You will continue to be asked
each time data recall is available.
 Never recall - You will never be asked to recall data.
When you choose Always recall or Never recall, you can reverse this setting.
To change data recall
From the Home screen, select
1
Select Yes or No, and then tap Done.
2

Setting the Print Options

Several print options are available for printing your labels. You can change the
options each time you print or you can save the options you use most often as
default settings.
The options you can set are:
 Print Range
 Number of Copies
 Collate
 Mirror
 Cut Labels
 Feed
You can change these print options in two ways:
 At the time you print labels: the options apply to that one print job.
™
40 XTL 500
User Guide
and select Auto shut-off.
and tap Recall data.