Replacing The Ret/Incom Switch; Removing The V Shoe Bracket; Bvp-E30/E30P M-V1 - Sony BVP-E30 Maintenance Manual

2-4. Replacing the RET/INCOM Switch

1. Remove the three screws, and remove the switch
panel.
2. Disconnect the harness from the connector CN1201 of
the MB-953 board.
3. Remove the three screws, and remove the SW-1075
board.
4. Desolder the switch to be replaced, and replace it.
Switch panel
+B2.6 x 6
RET switch
CN1201
5. Reassemble the parts in the reverse order of removal.

BVP-E30/E30P M-V1

+B2.6 x 6
SW-1075 board
INCOM switch
BTP2.6 x 6

2-5. Removing the V Shoe Bracket

1. Release the lock lever.
2. Slide the shoulder pad until the heads of the hexagon
cap screws with stopper become visible.
3. Loosen the two hexagon cap screws with stopper, and
remove the shoulder pad.
4. Remove the seven screws, and remove the V shoe
bracket.
M3 x 8
V shoe bracket
M3 x 8
Shoulder pad
Lock lever
K4 x 10
Hexagon cap screws
with stopper
2-9 (E)