Replacing The Side Switch Panel Block; Replacing The Front Switch Panel Block; Bvp-E30/E30P M-V1 - Sony BVP-E30 Maintenance Manual

2-9. Replacing the Side Switch Panel
Block
1. Remove the V shoe bracket. (Refer to Section 2-5.)
2. Remove the right side panel. (Refer to Section 1-5.)
3. Disconnect the harness from the connector CN1006 of
the CN-2205 board.
4. Remove the two screws, and remove the side switch
panel block.
5. Remove the two screws, and remove the SW-1067
board, shield plate and drop protection pad.
6. Desolder the switch to be replaced, and replace it.
Side switch panel
BTP2.6 x 6
7. Reassemble the parts in the reverse order of removal.
2-12 (E)
CN1006
CN-2205 board
Precision
P2.6 x 5
Drop protection
pad
Shield plate
SW-1067 board
2-10. Replacing the Front Switch Panel
Block
1. Remove the V shoe bracket. (Refer to Section 2-5.)
2. Disconnect the harness from the connector CN1003 of
the CN-2205 board.
3. Remove the two screws, and remove the front switch
panel block.
4. Remove the two screws, and remove the SW-1068
board, VR knob, VTR START button, shield plate and
drop protection cushions.
5. Desolder the switch or volume to be replaced, and
replace it.
CN-2205 board
CN1003
VTR START button
Drop protection
cushion
Front switch panel
Precision
P2.6 x 5
6. Reassemble the parts in the reverse order of removal.
BTP2.6 x 6
SW-1068 board
Shield plate
Drop protection cushion
VR knob

BVP-E30/E30P M-V1